Prettying up the Porch

Prettying up the Porch

Last summer  was my initial “investment” in the patio project.  I didn’t want to spend a lot of money, but I knew that I had to start somewhere, so the World Market Outdoor Furniture Sale was my first stop.  **TIP:  Apparently they have this sale annually,  mid-June to July, so if you plan ahead and watch for it, you can save BIG time.  I just happened upon the sale last year and a sales associate told me their goal is to have everything cleared out by July 4th.**

I ended up choosing this Catalina Occasional Deep Bench (it’s seriously deep – probably twin bed size!), Occasional Chair, Coffee Table and Side Table.  It took a little extra work to acquire the set (my local store didn’t have them all), but between my mom and I, we did it.  And even better, everything was 50-75% off because they were on sale (and some were store displays)!  {Retail value:  $600, Actual cost: $250}

Next up, I ordered a rug from Target {approximately $70}

DSC_0002sm

This summer I decided to add COLOR.

First I bought a slipcover for the bench and chair cushions (the day the went on sale because I was watching for the email)!  Actually, I bought a few so I can change them out – red, turquoise and off white.

DSC_0006sm

Then I mixed in a few colorful pillows and a lantern from Garden Ridge.

DSC_0007smOriginally, I thought some flameless candles from there would work too… but they melted after about 10 minutes in the heat.  So I went online and found these fab ones that are made specifically for the out of doors.  I like that they flicker, have an optional timer, and their glow isn’t that fake bright orange.

DSC_0016smI planted a few new flowers {in existing pots}, added a Patio Egg to keep the mesquitoes away and… DONE!

DSC_0012sm

I know it will probably always be a work in progress, but at least it’s cheerful and it’s a good start.

Cheers to prettying up the porch.  Now I just need to have a porch party to break it in!

PS- If you like the succulent tower, I’ve got instructions for how to make one here.

 

 

Succulent Tower

Succulent Tower

Last summer, I made a fun little “succulent tower” to put on my front porch.  At the time, I was just playing around and had no idea that someone might want to know how to make their own.  When it was finished, a few people asked me to blog a how-to, but since I hadn’t taken step by step photos, I couldn’t do that. {Yes, I’ve heard of bloggers starting over to recreate the scene, but… blogging isn’t my day job, so I don’t have time for that.}

Well, I accidentally let mine freeze this winter (oopsie!) and had to redo it, so here’s a half how-to.

Supplies Needed:

a tiered wire basket ( mine is similar to this one from Crate & Barrel  )

sheet moss (I got mine at JoAnn’s)

a few sheets of newspaper

scissors

2 cups (approx) gravel

2 cups (approx) play sand

Miracle-Gro Cactus, Palm & Citrus Potting Mix

Assorted succulents – I used 1 Ripple Jade (Crassula arborescens undulatifolia) for the top tier (broken into three parts), 4 (4 oz) Echeveria “Dondo”, 2 Key Lime Pie (adromischus cristatus) and 2 Graptosedum “California Sunset” (Graptosdeum)… but you can really use anything that’s small and will fit in the container you’re using.

Since I laid the groundwork last summer, I don’t have photos of these first three steps, but they’re pretty easy to visualize:

1.  Use the scissors to cut strips of the sheet moss, slightly wider than the width of each tier of the wired container, and place them inside each tier, moss-side-facing-out, starting the strip at the top edge of the wire basket (the “extra” width of the strip should curve around the bottom of the basket slightly, towards the inside of the tower).  The moss is mostly for looks, but it also keeps the soil contained, so you just need to make sure the edges are covered so soil doesn’t fall through the wire.

2.  Cut (or tear) newspaper to fit in the bottom of each tier and lay it flat all the way around.  Again, this is just to keep the soil from falling out and still allow for water to drain.

3.  Create a thin layer of gravel at the bottom of each tier to help weigh it down (and provide better drainage), then sprinkle the sand evenly over the gravel for each tier.

4.  Continue to fill each tier with the cactus potting mix, careful not to fill above the edge of the container.

photo 1sm

5.  Determine the placement of the succulents by placing them (in their plastic container) where you think they look best.  You can mix up the types and placement, but I wanted a more uniform look for this project, so I kept them evenly spaced (3 parts around the top, 4 of the same around the middle, and 2 of each kind, alternating, along the bottom tier).

photo 2sm

6.  Working one at a time, dig a small well for each succulent and then gently place it, reinforcing with soil to keep it in its spot.  I always feel like potting succulents is weird because they’re so light (no moisture in the soil) that it doesn’t have that satisfying “plop” into the potting mix that flowering plant does.  Just mound up soil round it once it’s placed, but be aware it still may feel fragile.photo 3smOnce all of the succulents are in place, they may be a little dirty, but don’t worry.  Once you give the entire tower a gentle watering, they’ll be bright and beautiful!

DSC_0014sm

In the warm months, I water my succulent tower once a week or so… and obviously I’m going to have to try harder in the winter with this one. (ha!)